XPT 1000 Spray System
The XPT-1000 - Easy and Fast Fluid Management - See the benefits of an open system for speed and efficiency in just a few minutes.
The Next Evolution in DTG Pre-treating
The XPT-1000 pretreatment machine is the next evolution in direct to garment pretreating. It is a totally new concept and engineered to give you the best, most efficient way to pretreat your DTG garments.
Even though it is an "open" design, we've taken our many years of experience in manufacturing pretreatment machines and expertise in fluid dynamics to create a unique and easy to use machine that is more efficient than other machines in the market - and at a price that is affordable for every DTG shop. Now there is NO EXCUSE for continuing to pretreat by hand. Because of its unique low pressure the spray STAYS IN the spray area - not all over your shop.
This pretreatment machine is super-simple to use. You can set the spray width (by adjusting the spray head height) and location of the spray (by moving the spray head left to right). Using the simple controls on the front panel, set the spray length (from 50mm-600mm) and then the amount of fluid applied (10%-100%). We include a simple chart on the top of the unit to accurately tell you how to set the Speed to achieve the desired amount of pretreatment for your shirt. Always make your own tests before batch pre-treating.
Simple Fluid Management
Simply connect your pretreatment, clean water, and CLEANING SOLUTION.
With three simple fluid inputs, fluid management is fast and easy. Simply connect your pretreatment, clean water, and CLEANING SOLUTION to the XPT-1000. By pressing the corresponding buttons, that fluid is pushed through the system. To load the pretreatment, simply place a bottle under the spray nozzle and press the RED pretreatment button. You'll see the pretreatment being sucked through the lines and into the spray head. At the end of the work day, put your bottle back under the spray nozzle, press the CLEAN button for about 10 seconds and then the WATER button for 10 seconds. The system will flush the pretreatment and cleaning solution through the Viper leaving your Viper XPT-1000 ready to sit until the next time you need to pretreat. There is no need to remove the spray tip daily.
Proper maintenance and cleaning of your pretreatment machine is key to making sure you get a long and productive life from your equipment. Pretreatment by nature can be hard on any piece of equipment. We've taken our popular cleaning routine and applied it to our XPT-1000.
Easy Laser Alignment
The built in line laser allows for fast and easy visual alignment of garments, pockets and other pretreating locations. Pretreating in the correct spot on the garment has never been easier.
Adjustable Spray Area
The easily adjustable spray head allows for instant changing of the spray width and location with adjustments left to right as well as up and down. Fast and easy adjustments with a spray area up to 500mm x 600mm.
- Dimensions (Complete Unit)
- 840mm wide x 915mm deep x 500mm high
- Power Requirements:220v AC (24V Power Supply)
- All Electric - Easy to Use
- Retail MSRP: Call 01246 202686.
Customer Testimonial - Chicago DTG
The Image Armor XPT-1000 Pretreater will pay for itself in just a few weeks compared to any other pretreater on the market. The labor savings of having an open system are evident after just 10 minutes of pretreating batches of shirts."
Built under license in the UK the Viper XPT 1000 is re named as the RDT 1000. Some components are changed in line with CE regulations. This machine is classed as a spray system not an enclosed machine. Always read the safety label on the solution you are spraying for safety instructions and correct use.